美国Heli-Coil进口工具件4238-5江苏总经销中国区代理商无锡市阿曼达机电有限公司
品牌:美国Heli-Coil
型号:进口工具件4238-5 HELI-COIL TANG断线工具公制粗（3695-04多款料号和价格可选）
Heli-Coil
M5螺纹插入柄断线工具
公制粗螺纹标准
Heli-Coil
M5 Thread Insert Tang Break Off Tool
Metric Coarse Thread Standard
HELI-COIL
Tool And Tap
Selection Guide
For Tanged Inserts
HELI-COIL
工具和水龙头
选型指南
对于缠结刀片
MFG # 4238-5, HELI-COIL TANG BREAK-OFF TOOLS METRIC COARSE
More
The driving tangs of Heli-Coil inserts must be removed to eliminate their interference with the
end of the assembled bolt. Heli-Coil tang break-o tools are available for use with inserts
through 1/2 inch and 12mm metric nominal diameter. Their operation is automatic, having a
spring loaded, easily triggered punch that strikes a sharp, uniform blow against the tang of the
installed insert. The tool can be operated with one hand..
Note: Tang break-o tools will break- o tangs thru 2 diameter
MFG＃4238-5，HELI-COIL TANG断线工具公制粗
更多必须去除Heli-Coil刀片的驱动柄，以免干扰
组装螺栓的末端。 可使用Heli-Coil tang拆卸工具与刀片一起使用
公称直径为1/2英寸和12mm。 他们的操作是自动的，
弹簧加载，容易触发的打孔器，对着枪管的柄部进行均匀，均匀的打击
安装的插件。 该工具可以用一只手操作。
注意:Tang折断工具将通过2个直径折断tangs。
Heli-Coil进口工具件4238-5产品价格参数和图片说明:
Helicoil 4238-5
4238-5 M5X0.8 H-COIL MTR.BREAK OFF TOOL
Mfr Description: 4238-5 AUTO.TBO TOOL M5X0.8
Heli-Coil
M5 Thread Insert Tang Break Off Tool
4238-5
Heli-Coil
#4-40, #4-48 and #5-40 Thread Insert Tang Break Off Tool
UNC and UNF Thread Standard
3695-04
Heli-Coil
#10-24, #10-32 and #12-24 Thread Insert Tang Break Off Tool
UNC and UNF Thread Standard
3695-3
Heli-Coil
#6-32, #6-40 Thread Insert Tang Break Off Tool
UNC and UNF Thread Standard
3695-06
Heli-Coil
1/4-20 and 1/4-28 Thread Insert Tang Break Off Tool
UNC and UNF Thread Standard
3695-2
Heli-Coil
#2-56, #3-48 and #3-56 Thread Insert Tang Break Off Tool
UNC and UNF Thread Standard
3695-02
Heli-Coil
M6 Thread Insert Tang Break Off Tool
Metric Coarse Thread Standard
4238-6
Heli-Coil
M3 Thread Insert Tang Break Off Tool
Metric Coarse Thread Standard
4238-3
Heli-Coil
3/8-16 Thread Insert Tang Break Off Tool
UNC Thread Standard
3695-6
Heli-Coil
M4 Thread Insert Tang Break Off Tool
Metric Coarse Thread Standard
4238-4
Heli-Coil
M8 Thread Insert Tang Break Off Tool
Metric Coarse and Fine Thread Standard
4238-8
Heli-Coil
1/2-13 Thread Insert Tang Break Off Tool
UNC Thread Standard
3695-8
Recoil
#4-40 and #4-48 Thread Insert Tang Break Off Tool
UNC and UNF Thread Standard
59081