济南伸缩蓬厂
1、必须按施工图放样，放样和号料时一定要预留焊接收缩量和加工余量，然后根据放样作样板；对于钢材的矫正，钢材下料前必须先进行矫正，矫正后的偏差值不得超过规范规定的允许偏差值.
1, must according to the construction lofting, lofting and materials must be reserved for welding and machining allowance, and then make the model according to the layout of the steel; correction, steel cutting must be carried out before the correction, after the error correction value deviation shall not be allowed to exceed the specification value.
这样方可保证下料的质量；热加工的型钢先热加工，待冷却后再号孔；钢板预埋件及其他零件切割钻孔及喷防腐漆处理。
It can ensure the quality of steel material; thermal processing of the first heat processing, after cooling to the hole; cutting steel embedded parts and other parts of drilling and anti-corrosion spray paint processing.
2、遮阳篷的悬挂臂安装要采用焊接，同时还需检查焊接节点，调节悬挂臂设计坡度，确定无误后方可进行焊接.
2, the awning hanging arm installation to be welded, but also need to check the welding node, adjust the design of the suspension arm slope, determine the error before welding
靠边一条悬挂臂准确无误后，安装另一边一条悬挂臂，就位准确后方可点焊；以这两条悬挂臂为基准拉出悬挂臂的最高、最底标高线，一一焊接剩余悬挂臂，并焊接无缝钢管.
Pull a suspension arm after the accurate installation on the other side of a hanging arm, accurate positioning before spot welding; these two suspension arms based out of suspension arm the highest and the bottom elevation line, one welding residual suspension arm, welded and seamless steel pipe.
型钢需接长时先焊接头并矫直，采用型钢接头时，为了使接头型钢与钢板预埋件紧贴，必须按设计要求铲去楞角；对接焊缝应在焊缝的两端焊上引弧板，其材质和波口型式与焊件相同，焊后气割切除并磨平。
Steel need to take a long time before welding and straightening, with steel joints, in order to make the joints of steel and steel embedded parts must be close to, according to the design requirements of shovel to corners; butt welds shall be arc plate at both ends of the weld, the material and the wave mouth type and welding, after welding cutting and grinding removal.
公司内部也建立了严密的管理体系，能够向客户提供高品质各类产品的服务。正是这样，凭着产品过硬、质量和企业的良好声誉，本公司赢得了广大客户的一致好评与信赖，并建立了长久友好的合作关系。
诚邀山东各地市级加盟代理。
欢迎各方客户前来洽谈业务，真诚合作，共创繁荣。
公司:济南伸缩蓬厂
诺商基于多年的优化经验和品牌基础推出的诺商商道系统，诺商信息您身边的互联网专家！