立式加工中心 VMC1060、VMC1370、VMC1580
| 项目 | Item | VMC1060 | VMC1370 | VMC850 |
| 工作台尺寸mm | Pallet size | 1300x600 | 1400x700 | 1700x800 |
| 左右行程（X）mm | X axis travel | 1000 | 1300 | 1500 |
| 前后行程（Y）mm | Y axis travel | 600 | 700 | 800 |
| 上下行程（Z）mm | Z axis travel | 600 | 650 | 700 |
| 主轴中心至立柱导轨距离mm | Distance from Spindle center to Columm guide | 630 | 785 | 800 |
| 主轴端面至工作台面距离mm | Distance from spindle nose to table | 120-720 | 150-800 | 170-870 |
| 工作台T型槽 | T-type tank | 5-18x100 | 5-18x152.5 | 5-22x135 |
| 主轴锥孔 | Type of taper hole | BT40 | BT50 | BT50 |
| 主轴最高转速tpm | Max spindle speed | 8000 | 8000 | 8000 |
| 主轴马达功率kw | Spindle power | 11/15 | 11/15 | 15/18.5 |
| X.Y.Z轴伺服电机kw | Three-axis servo power motor | 2.2/2.2/2.5 | 4/4/4 | 4/7.5/4 |
| X.Y.Z轴电机链接方式 | Three-axis motor coupling | Direct Torque motor | Direct Torque motor | Direct Torque motor |
| X.Y.Z轴导轨方式 | Three-axis rail-way | Slide-rail | Slide-rail | Slide-rail |
| 工作台最大负荷kg | Max.weight on pallet | 800 | 1000 | 1500 |
| 换刀速度 pcs | Tool changing time(tool-to-tool) | 1.8 | 2.5 | 2.5 |
| 选刀方式 | Tool selection mode | The nearesr | The nearesr | The nearesr |
| 刀库容量 pcs | Tool storage capacity | 24(Turntable) | 24(Turntable) | 24(Turntable) |
| 最大刀具重量kg | Max.tool weight | 8 | 20 | 20 |
| 最大刀具长度mm | Max.tool length | 350 | 350 | 350 |
| 最大刀具直径mm | Max.tool diameter | Φ80 (adjacent knife)/ Φ125(Adjacent no knife) | Φ150(adjacent knife)/ Φ250(Adjacent no knife) | Φ80(adjacent knife)/ Φ350(Adjacent no knife) |
| XYZ快移速度m/min | Rapid travese rate | 15/15/12 | 15/15/12 | 15/15/12 |
| 切削进给速度m/min | Cutting feed speed | 8 | 8 | 8 |
| XYZ定位精度mm | Positioning precision | ±0.01 ±0.008 ±0.006 | ±0.01 ±0.008 ±0.008 | ±0.0012 ±0.008 ±0.008 |
| XYZ重复定位精度mm | Repeatability | ±0.005 ±0.004 ±0.004 | ±0.005 ±0.004 ±0.004 | ±0.006 ±0.005 ±0.004 |
| 机器外形mm | LxWxH | 3300x2500x2700 | 3800x3010x2700 | 4200x3100x3100 |
| 机器总重kg | Weight | 6500 | 9500 | 12000 |