服务中心已遍及华北、华东和华南等地区。主要负责百达翡丽、爱彼、江诗丹顿、芝柏、宝玑、宝珀、朗格、劳力士、积家、卡地亚、欧米茄、万国、浪琴等国内外大小五十多个手表品牌的售后维修工作.专业的维修技术、透明的维修价格、当面检测维修定价、立等可取的维修效率。电话预约可享9折优惠！专业专注，专心服务!让时间鉴定品质!瑞亨名表维修中心，您身边的手表养护专家!
________________________________________________________________________________________________________________
________________________________________________________________________________________________________________
手表知识:手表秒针停走处理方法 手表秒针不走，这是大多数戴表的人都会遇到的问题，戴表很久了的人一般都知道这种问题要怎么解决，但是刚开始戴表的人就会不知道这是怎么回事了，手表秒针不走，如果是机械的话可能是没有上劲，经常上上劲就好了。要是电子表的话，那就可能是手表没有电了，试试换个电池看看，如果是刚换了还是有问题的话，那就是你的手表可能花了，建议送到修手表的地方看看，是不是手表进水了。手表秒针停走该怎么办如果是石英的话有些大秒针是不走的，一般三眼的计时指针手表平时长秒针不走的,只有计时才走，三个小盘中一个小盘一直在走的才是时间的秒针,这是省电设计,大部分的计时手表都是这样的,具体请看说明书。如果是机械表，走时误差是比较大的，没有石英表准确。新购的全自动机械表在一周内恐怕日间活动量不够，而导致走时不足，故建议晚间放下前，把手表以水平状态将其左右反复摇摆约10分钟，以补充上弦，确保走时正常。全自动机械表须靠手臂摆动而自动上弦，所以每天必须配带12小时以上，才可确保计时准确。最简单的方法就是拿去修，不过有可能是以下几个情况:卡上弦、秒针松动，摇几下看行不行，不行的话只能送过去修了。先自己确认是不是只有秒针不走，其他正常，如果其它都正常，估计就是卡上弦。大多数的自动上弦腕表都可以用手动来上发条，尤其是初次佩戴或停走后再次佩戴时应该先用手动来上足发条，而不建议依靠自动陀来上满弦。手动上弦腕表在感觉到上不动弦的时候就意味着发条满了，但自动上弦腕表基本上是感觉不到的，所以对自动腕表的上弦次数建议宁多勿少，40下左右就基本保障能上满了。但不要经常手动上发条，那样对把头的防水垫圈有害，会影响手表的防水功能。 watch watch second hand knowledge: stop and go watch the second hand processing method does not go, this is the most of them will encounter problems, wearing a watch for a long time people generally know how to solve this problem, but the beginning of them will not know what this is, watch second hand away if it is possible, there is no mechanical strength, often work well. If the electronic watch, the watch may be no electricity, try changing the battery to see if it is just changed or if there is a problem, that is your watch may be spent, suggest to watch repair places to see, is not watch water. watch second hand stop and go to do if some large second hand quartz is not to go, general timing pointer watch three eyes usually do not go long the second time, only leave three small cap in a small cap has been going to is the time of the second hand, this is the saving design, most of the time is this kind of watch. Please see specific instructions. if it is a mechanical watch, travel time error is relatively large, there is no accurate quartz table. The purchase of new automatic mechanical watches in a week that daytime activity is not enough, resulting in the lack of time, the night before down, to watch the level to be repeated for about 10 minutes, to supplement the bend, ensure the normal walking. automatic mechanical watches must rely on the arm swing and automatic winding, so every day must be equipped with more than 12 hours, to ensure accurate timing. The easiest way to is repaired, but there may be the following: first, the second card shake loose, look okay, if not only send repair. is not only the first to confirm the second hand does not go, the other is normal, if the other is normal, is estimated to top card. Most of the automatic winding watch can be used manually to wind up, especially the first wear or stop and go again after the wear should be the first to use the manual to wind up, and is not recommended to rely on Automatic full string. The manual winding watches in real time to feel the string means a full automatic winding watch, but basically is not the feeling, so many times of Ning first automatic watch not less, about 40 is the basic guarantee to the full. But do not often manually on the spring, as the head of the waterproof gasket harmful, will affect the performance of the waterproof watch.