南京科友工业设备有限公司
当前位置:供应信息分类 > 建材 > 木质材料 > 木板材

3GrH85×2-40水泥磨机润滑泵替换川润型号

3GrH85×2-40水泥磨机润滑泵替换川润型号 3GrH85×2-40水泥磨机润滑泵替换川润型号
  • 3GrH85×2-40水泥磨机润滑泵替换川润型号
  • 3GrH85×2-40水泥磨机润滑泵替换川润型号
  • 供应商:
    南京科友工业设备有限公司
  • 价格:
    8890.00
  • 最小起订量:
    1台
  • 地址:
    南京市浦口区柳州南路22号
  • 手机:
    13905195836
  • 联系人:
    夏熙 (请说在中科商务网上看到)
  • 产品编号:
    137823069
  • 更新时间:
    2022-09-22
  • 发布者IP:
    180.110.208.221
  • 产品介绍
  • 用户评价(0)

详细说明

  南京科友工业设备有限公司 【KYP】

  如果你选型上有疑问,请和我们及时联系

  热枕欢迎合作伙伴来我厂考察,指导工作

  川润润滑油泵,液压油泵,重油泵//天津螺杆泵3GR85*2W2

  Run Chuan lubricating oil pump, hydraulic pump, oil pump / Tianjin screw pump 3GR85*2W2

  一、特点:

  One, the characteristic:

  三螺杆泵包括3G 3GR三螺杆泵通用型,3GC 船用三螺杆泵型及3GS三螺杆泵 3GCL三螺杆泵 3GCLS三螺杆泵等特殊型。三螺杆泵是转子式容积泵,由于主动螺杆与从动螺杆上螺旋槽相互啮合及它们与衬套三孔内表面的配合,得以在泵的进出口之间形成数级动密封腔室,这些动密封腔室将不断把液体由泵进口轴向移动到泵出口,并使所输液体逐级升压,从而形成一个连续、平稳、轴向移动的压力液体。

  Three screw pump including 3G 3GR three screw pump universal pump type and 3GS three screw, three screw pump 3GCL three screw pump3GCLS three screw pump and other special type of 3GC ship. Three screw pump's rotor type displacement pump, the driving screw and the driven screw spiral groove meshed with each other and they and the Bush inner surface with three holes, to form number level dynamic sealchamber between the import and export of the pump, the dynamic seal chamber will continue to put the liquid from the pump inlet to the pump outlet axial movement, and the the transfusion step, so as to form acontinuous, stable, the axial movement of the pressure of liquid.

  二、适用介质及性能范围:

  Two, suitable for medium range and performance:

  三螺杆泵所输液体为各种不含固体颗粒,无腐蚀性油类及类似油的润滑性液体,所输液体粘度为1.2~100°E(3.0~760cst),高粘度液体亦可通过加温降粘后输送。流量范围0.2~590m3/h,最高工作压力100bar,最高温度150℃。

  Three screw pumps transport liquid without solid particles, liquid lubricating oils and oil of similar non corrosive, lose liquid viscosity of 1.2~100 degree E (3.0~760cst), high viscosity liquids or viscosity by heating after the delivery. Flow range of 0.2~590m3/h, the maximum working pressure is 100bar, the maximum temperature of 150 degrees.

  三、结构:

  Three, structure:

  3GR85*2

  3GR85*2

  1、结构简单:具有多种结构形式,一般小流量0.2~6.5m3/h,泵的泵体和衬套合为一体(统称泵体),轴封为机械密封。

  1, the structure is simple: with a variety of structural form, usually a small flow of 0.2~6.5m3/h, pump body and the liner into one (collectively referred to as the pump), seal mechanical seal.

  中等流量以上的泵衬套为一单独的零件固定于泵体内,大流量泵多制成双吸结构卧式安装,轴封根据输送介质的不同有机械密封和填料密封两种。

  Medium flow above for a single pump bushing fixed in the pump body parts, large flow pump more than double suction structure made ofhorizontal installation, seal according to the different transmission mediaare two kinds of mechanical seals and packing seal.

  船用泵的安装形式有卧式和立式两种,原动机为交、直流船用电动机。

  Marine pump installed in the form of a horizontal and vertical two kinds,the original motivation for the AC and DC motor ship.

  2、寿命长:三螺杆泵的主动螺杆由电动机驱动,主、从杆之间没有机械接触,而由所输压力液体驱使从杆绕轴心线自转,主、从杆之间、螺杆与衬套之间皆有一层油膜保护,因而泵的机械摩擦极小,寿命堪称半永久性。

  2, long service life: active screw and three screw pump driven by a motor,the Lord, have no mechanical contact from the pole, lost by the pressure of the liquid drives from the rod rotation around the axis line, the main,from between the rod and between the screw and bushing has a layer of oil film protection, so very small mechanical friction pump, life called semi permanent.

  3、所输液体在泵内作轴向匀速直线运动,故压力脉动小,流量稳定,噪音低,由于转动部件惯性小,则起动力矩和振动很小。

  3, the transfusion liquid axial uniform linear motion in the pump, so the pressure fluctuation is small, the flow stability, low noise, due to the inertia of rotating parts is small, the starting torque and vibration is small.

  4、具有高吸入能力。

  4, with high suction capacity.

  5、为保证泵,电机及管路系统的安全,中等流量以上的螺杆泵均带有安全阀当压力超过安全阀的设定压力时,高压油将回流至泵的进油

  5, to ensure the pump, motor and pipeline system safety, traffic over the middle screw pump is provided with a safety valve when the pressure exceeds set pressure of safety valve, high pressure oil into the oil will flow back to pump