OMNIBeadRuptor24均质器/匀浆机/细胞破碎仪是一款专门用于生物样品分子提取前的研磨，裂解和均质的研磨器（又可称:匀浆器、均质机、均质器、细胞破碎仪、组织研磨仪等），该样品研磨器一次能处理 24 个样品研磨，并在短短 40 秒内就完成研磨。优化研磨珠运动减少涡流，提高处理效率减少样品发热。
OMNIBeadRuptor24均质器/匀浆机/细胞破碎仪傻瓜式的操作让您轻松完成样品研磨！您只需将要研磨的样品放入专用研磨管（管中已经预装了各种研磨珠），将装有样品的研磨管水平插入 OMNIBeadRuptor24均质器/匀浆机/细胞破碎仪的工作架中，盖上盖子，设定工作的速度和时间（或调用之前已经设定好的数据），点击“启动”即可。研磨程序结束，OMNIBeadRuptor24均质器/匀浆机/细胞破碎仪会发出警报提醒用户进行后续操作。
对于冷冻样品，OMNIBeadRuptor24均质器/匀浆机/细胞破碎仪有 Cryo24 冷却器来维持工作腔内的低温状态[选配]。
OMNIBeadRuptor24均质器/匀浆机/细胞破碎仪可研磨的样品非常广泛，包括所有的软组织(细菌，肝，脑，皮肤等)；坚硬/坚韧的组织(骨头，玉米，毛发，种子，土壤等)；微生物(革兰氏阳性菌，革兰氏阴性菌，酵母等)。
rocessing Range:25 micro-liters to 50mL
Power Rating:100-230 VAC/ 50-60Hz
Dimensions:L: 13in(33.0cm), W: 15.5in(39.4cm), H: 13in(33.0cm)
Product Weight: 65 lbs. (29kg)
Compliance:CE Compliance
Run Time:1 second to 9:59 minutes
Performance Range:0.8m/s - 8m/s in increments of 0.15m/s
Number of Cycles:1-10
Safety:Integrated lid lock to prevent lid opening during operation
Warranty:One Year
Lyse the toughest samples in seconds
The Bead Ruptor is the most advanced and easy to use bead mill homogenizer available. It is specifically designed for grinding, lysing, and homogenizing biological samples prior to molecular extraction.
Wide range of accessories for any sample size - 24 x 0.5 mL, 24 x 1.5 mL, 24 x 2 mL, 12 x 7 mL, 3 x 15 mL, 6 x 30 mL, 3 x 50 mL, or 96-well strip well tubes.
Most powerful bead mill on the market – homogenize the most challenging samples
No cool down required between runs: process hundreds of samples per day
Convenient front loading design, 99 programmable memory settings, and multilingual user interface
Features an integrated lid lock to prevent lid opening during operation
Ideal homogenizer for extraction of DNA, RNA, proteins, and small molecules
Optimized tube motion ensures highest performance
The Bead Ruptor 24 is designed with a unique carriage motion to ensure that the intra-tube bead movement reduces swirling and results in the highest bead impact forces of any bead mill on the market. The increased power of the Bead Ruptor 24 decreases processing time and reduces sample heating to maximize sample homogenization efficiency.
| |
| Bead impact forces generated by commercially available bead mills. Bead impact forces are calculated as a function of tube acceleration, tube displacement and the motor force applied to the tube. The Bead Ruptor 12 and 24 have the broadest force range and produce the highest impact forces of any bead mill on the market. This results in an increased processing efficiency on the Bead Ruptor platforms |
Increase protein, DNA and RNA yields with the Bead Ruptor 24
The Bead Ruptor 24 unique tube carriage motion coupled with sample specific bead beating materials ensure that a thorough homogenate is achieved regardless of the sample type. The high lysing efficiency of the Bead Ruptor 24 results in a increase in nucleic acid, protein and small molecules yields and increases the sensitivity of the downstream assay.
| |
| Total mRNA yields and relative purity; Absorbance values at 260 nm and 280 nm were used to determine total mNRA yield and puity following extraction. mRNA yields where on average 4 times higher when bead milling was performed compared to dounce homogenization. Nucleic acid relative purity was comparable between both methods. |
| |
| Drosophila protein extracts analyzed by SDS PAGE. Lane 1:Protein ladder. Lane 2-3:30 mg of Drosophila homogenate. Lane 4-5:30 mg ofDrosphila homogenate. |
Wide range of bead kits for any sample type
Omni International offers users ultimate flexibility with a range of bead beating tubes and lysing matrices to support homogenization of any sample type.
Ordering Information: Bead Ruptor Drive Unit, user manual and 1-year warranty.
Note: Bead Ruptor Tube Carriages sold separately.