ATC1500-QRX-2
适用:适用于充电器，电源适配器，移动电源,LED驱动电源的在线测试！
ATC1500-QRX适用于电源厂生产线测试使用。
机柜型测试，测试速度快，同时可迅速形成测试报表，有效的提高了工厂的品质控制能力。
特点: 1.测试速度快,精度高!
2.充电器、适配器、移动电源测试.
3.待机功率可最小测至3mW左右.
4.性价比高.
5.自动生成Excel(内含生产数量,不良率,柏拉图,CPK值.)
6.可测试平均效率,I-V曲线.
7.具有LED负载模式,可测试LED驱动电源
二、配置清单:
| 配件明细 | | ATC150主机X4 | 内含4路电子负载(0-60V/0-15A/150w)/4路功率计/4路示波器模块 | 品牌:STS |
| 四通道测试架X1 | 左右智能转换 | 品牌:STS |
| 工业电脑X1 | 研为工控 | 品牌:研为 |
| 显示器X1 | BENQ | 品牌:明基 |
| ID电压测试盒 | 4路ID电压 | 品牌:STS |
| 配套线材X1 | 配套连接一 | 品牌:STS |
| AC变频电源 | 0-300V/1000VA | 品牌:STS |
| 软件X1 | STS自主研发 | 品牌:STS |
| 机柜X1 | 19"标准机柜1.7米高. | 品牌:怡丰 |
.因为STS的仪器为高度集成式设计,所有模块均集成在一个主机内,该主机即为ATC150.该主机内置了以上1-5项的模块.以上产品除工业电脑外,其它所有模块均由STS自行生产.
STS的产品为 美国设计,中国制造.
售后服务: 所有产品自销售之日起一年内免费维修,终身维护.
三、主要功能特点:
1.可以测试充电器,适配器,移动电源,LED驱动电源等.四通道同时测试，提高生产效率。为客户节约2－3名人工。
2.图形界面基于Windows XP环境
3.测试程序编辑存储功能
4.测试项目选择功能（输入/输出/空载/短路
欠压/稳压/过载/纹波/效率等功能）
5.统计测试报告（Excel电子档）
6.自动生成CPK等品质报表
7.配置灵活
8.性价比高，适合大中小企业。
9.测试速度快
10.测试不良结果实时打印功能(需外接打印机)
四、测试项目
| Test Name | Parameter and Range | Accuracy |
| START UP启动 | Inrush current: 0 – 83ApkStartup time: 0 to 32767msec.Output voltage overshoot: 0 – 60VpkRise time :0-32767msec | ±1% (reading + range)±1ms±1% (reading + range)±1ms |
| UVLO欠压 | Functional test only, Pass/Fail | N/A |
| IDLE待机 | Standby input power: 0 –5/25/250/1250WStandby input current: 0 – 0.1/0.5/5/25ApkInput voltage: 30 – 280V*Note 2 | ±0.1% (reading + range)±0.1% (reading + range)±0.1% (reading + range) |
| STANDARD CV(Constant Current and Constant Resistance load) 恒压 | CC Mode: 0 – 3/15 ACR Mode: 0.1 – 50OhmInput Voltage: 30 – 300Vrms *Note 1Input Current: 0 – 0.1/0.5/5/25Apk Input Power: 0 –5/25/250/1250WPower Factor 0 – 1.0 Output Voltage 0 – 15/60VdcOutput Current 0 – 3/15AdcEfficiency: 0 – 100%Ripple/Noise 200kHz: 0 – 500mVRipple/Noise 20MHz: 0 – 500mVID Voltage:0-60v | ±0.15% (setting + range)±0.3% (setting + range) *Note 2±0.1% (reading + range)±0.1% (reading + range)±0.1% (reading + range)±0.2% (reading + range)±0.05% (reading + range)±0.1% (reading + range)±0.25% (reading + range)±2% (reading + 5mV)±2% (reading + 5mV)±0.1% (reading + range) |
| STANDARD CC(Constant Voltage and Constant Resistance load)恒流 | CV Mode: 0 – 15/60VCR Mode: 0.1 – 50OhmInput voltage: 30 – 300Vrms *Note 1Input Current: 0 – 0.1/0.5/5/25Apk Input Power: 0 –5/25/250/1250WPower Factor 0 – 1.0 Output Voltage 0 – 15/60VdcOutput Current 0 – 15AdcEfficiency: 0 – 100% | ±0.15% (setting + range)±0.3% (setting + range) *Note 3±0.1% (reading + range)±0.1% (reading + range)±0.1% (reading + range)±0.2% (reading + range)±0.05% (reading + range)±0.1% (reading + range)±0.25% (reading + range) |
| LED Driver Test (LED Load)LED负载 | Input voltage: 30 – 300 Vrms *Note 1Input Current: 0 – 5/25Apk Input Power: 0 – 250/1250WPower Factor 0 – 1.0 Output Average Current reading: 0 – 15AdcOutput Average Voltage reading: 0 – 60VdcOutput pulsed current reading (TRIAC, PWM) | ±0.1% (reading + range)±0.1% (reading + range)±0.1% (reading + range)±0.2% (reading + range)±0.1% (reading + range) *Note 4±0.05% (reading + range) *Note 4±0.5% (reading + range) |
| SHORT CIRCUIT短路 | Input voltage: 30 – 300 Vrms *Note 1Input Current: 0 – 5/25Apk Input Power: 0 – 250/1250WPower Factor 0 – 1.0 Output Average Current: 0 – 15Adc | ±0.1% (reading + range)±0.1% (reading + range)±0.1% (reading + range)±0.2% (reading + range)±0.2% (reading + range) *Note 4 |
| OVER CURRENT过流 | Current trip point: 0 – 3/15AdcTrip point voltage: 0 – 15/60VdcWait Time >= 10msec.Wait Time < 10msec.Voltage Before Trip Point: 0 – 15/60VdcCurrent Before Trip Point: 0 – 3/15Adc | ±0.1% (reading + range) ±0.05% (reading + range)±0.1% (reading + range)±0.1% (reading + range)±0.1% (reading + range) |
| OVER VOLTAGE过压 | OV trip point: 0 – 60V | ±0.1% (reading + range) |
| LINE REGULATION线性调整 | Voltage regulation: 0 – 100% | ±0.1% (reading + range) |
| LOAD REGULATION负载调整 | Voltage regulation: 0 – 100% | ±0.1% (reading + range) |
| AVERAGE EFFICIENCY 平均效率 | Efficiency: 0 – 100% | ±0.25% (reading + range) |
| I-V CURVE PLOT I-V曲线 | CC Mode: 0 – 3/15 ACC Mode Output Voltage 0 – 15/60VdcCC Mode Output Current 0 – 3/15AdcCV Mode: 0 – 15/60VCV Mode Output Voltage 0 – 15/60VdcCV Mode Output Current 0 – 15Adc | ±0.15% (setting + range)±0.05% (reading + range)±0.1% (reading + range)±0.15% (setting + range)±0.05% (reading + range)±0.1% (reading + range) |
| POWER DOWN关机 | Holdup time: 0 – 65535 msec.Input voltage: 30 – 300Vrms *Note 1Output Current 0 – 3/15AdcOutput voltage overshoot: 0 – 60Vpk | ±1ms±0.1% (reading + range)±0.1% (reading + range)±1% (reading + range) |
| Global Setting总体设定 | Load On Voltage: 0 – 60VdcWait Time: 0 – 32767msec.Nominal Output Voltage: 0 – 60VdcNominal Output Current: 0 – 15Adc | ±1% (reading + range)±1ms±1% (reading + range)±1% (reading + range) |
| Optional Setting可选项设定 | Bias Output Voltage: 0 – 28VdcRelay State rated current:3A | ±0.2% (reading + range)- |