Properties: high strength and solvent resistance.
Purpose: used in fasteners M6 or smaller
Better effect with a certain pattern of lubrication
The locking strength can be achieved accurately.
Viscosity: 1200/2400
Cure time: 20 minutes /10 hours
Removing torque: 32N.m
Relative density: 1.108
instructions:
1 surface treatment: derusting, degreasing, cleaning and drying
Rust can be mechanical or chemical methods: degreasing, cleaning and using appropriate organic solvent (such as acetone solution
For two to three times to soak in.
2 apply anaerobic adhesive: apply adequate amount of anaerobic adhesive to fill the gap.
3 assembly: should be positioned as soon as possible, after positioning can not move the workpiece
4 curing: general 1 hours anaerobic adhesive can achieve the use of strength, 24 hours to reach the maximum strength.